Set alata za lemljenje BAKU BK-120
Kliknite na sliku za zumiranje |
|
1.About the Solder assist repairing tools set number piece:
Package include:knife, fork, reamer, chip hold, brash and needle
2.Chip Hold
The process of welding can be used for fixed small components
3.Needle
For pick up the PLCC IC ,the Curved needle is easy to take out the PLCC IC from adapter.
4.Remove
After remove the paste,use this tool for hook the pin and take out the small components
5.Fork
Before Solder,use this tool for adjust or changing the location of the pins
6.Reamer
On the circuit board for manual processing.the expansion of components of the aperture
7.Scraper
To remove the lead paint and insulating oxide layer in the circuit board and pin
8.Knife
For Amendments and changes to the circuit board and pin
9.Brash
Clean residue from the circuit board and remove oxides from the circuit board
Komentar: Ukoliko postavljate pitanje, na kraju komentara možete ostaviti Vaš broj telefona na koji Vam možemo odgovoriti. Broj telefona neće biti vidljiv nakon objavljivanja komentara.
Ocena: Loše Dobro
Sigurnosni kod: